Using 课堂教学技术 (Student Guide)

Classroom Instructions for Most Rooms (触摸屏控制)

Classroom Instructions for Rooms without a Touchscreen Control Panel (Physical keypad in room.)

点击这里 for instructions for classrooms with a IR remote only. (No keypad/touchpad by lectern.)

Using the Solstice Device

Several classrooms are now equipped with a wireless screen sharing device called a Solstice.  These allow you to display content from your personal device on the classroom projector screens. 

  1. If you are in a Solstice enabled classroom, 找到海报 with the Solstice IP地址 near the front of the classroom. It should list an address starting with 129.119.x.x
  2. 打开一个 web浏览器 输入这个 IP地址 在地址栏中
  3. 点击 获取应用程序 and install the 应用程序lication on your device
  4. 启动 至客户端 应用程序
  5. 点击 输入IP
  6. 进入 IP地址 displayed on the poster in the classroom
  7. 连接, 客人 并点击 OK.  You may be prompted to 输入代码 that is displayed on the projector screen in the classroom.
  8. If the session is in moderated mode, the faculty member will be prompted to 应用程序rove your connection.
  9. To display content on the screen, select the sharing icon. If you are using an iOS device, you will be prompted to enabled AirPlay Mirroring. Swipe up from the bottom of your device and tap AirPlay Mirroring. Then connect to the Solstice device listed by the room number.
  10. The faculty member will have to 应用程序rove your content from the podium computer before it will be displayed on the screen.
  11. 点击 断开连接 to end the sharing session. For iOS devices, be sure to turn off AirPlay mirroring 当完成.

Please note: Certain video streaming 应用程序s like YouTube block sharing from iOS devices. To display a YouTube video, please use the podium computer.

Connecting to an Epson shared whiteboard session

A few classrooms now feature an Epson interactive projector. If the projector is connected to the internet, the faculty member can enable a whiteboard sharing session.  This allows students to connect to the 白板 from their personal device. The sharing session can be configured to allow view only, annotation mode or full collaboration mode from all devices.  Before connecting to a whiteboard session, the faculty must initiate the whiteboard sharing session and generate a pin code.

  1. Once the sharing session has been established, launch a web浏览器
  2. 输入IP地址 of the whiteboard that is currently sharing content.  The IP地址 will be displayed on a poster near the front of the room or displayed on the whiteboard itself.
  3. 单击 白板 option
  4. 进入 销 provided by your instructor
  5. At the end of the screen sharing session, the faculty can choose to distribute copies of all the slides.  If they do so, an alert will 应用程序ear to download the content.
  6. 关闭 your browser to end the sharing session.

Connecting to a Kaptivo 白板 Session

If you are in one of the rooms equipped with a Kaptivo device, the instructor will either share the whiteboard screen via Zoom or send you a shared link for the whiteboard session. If you attempt to join a whiteboard session without the shared link, the instructor will need to 应用程序rove each attendee in order for them to see the whiteboard.  Instead, simply click on the shared link they provide.  You have the ability to view previous whiteboard slides using the Timeline feature at the bottom.  You can also download all content as a PDF.